|
MODEL |
IMAGE / DESCRIPTION |
PRICE in USD ($) |
87SW3 |
![[click here to enlarge]](87SW3sm.jpg)
Upgraded power window sitch & wiring harness
kit.
This kit is similar to the 80SW3 harness that
has a "pwer booster" relay. The difference
is that the switches in this kit have been upgraded
- the switches are illuminated arrow (lighted
switches) and has bullet type, 4-wire & 5
wire terminal connections. Switches may be,
mounted with or without the "switch frames"
(monting bezel). Driver-side has two 4-wire switches,
with 2 hole switch framem and the passenger side
has one 5-wire switch, with a 1 hole switch frame.
Recommended as a replacement power window harness
for 2-door vehicles.
|
|
81SW7 |
![[click here to enlarge]](81SW7sm.jpg)
Seven (7) stenciled-arrow awitched & harness
system. For 4-door vehicles.
This kit includes plug-in type switches, (with
"gang-type" mounting bezel & integrated
rear lockout switch) & colorcoded wiring harness:
4-gang type switches for the Driver-side, plus
rear lock switch & 3 switches for the passenger
& rear doors. Switches are non-illuminated
with "up and down arrow" mark.
|
|
87SW7 |
![[click here to enlarge]](87SW7sm.jpg)
Upgraded power window switch & wiring harness
kit..
Similar in construction and design as the 87SW3 switch & wire harness
kit. For 4-Door application. This kit comes
with 7 switches and one (rear) lock-out switch
- which can be installed with or without its "switch frames" (mounting frame
or bezel). The driver-side has 4-wire switches,
mounted on 4 hole switch frame (with a lock switch);
and three individual 5-wire switches (each with
a 1-jole switch frame) for the passenger and rear
doors.
|
|
80124 |

2 or 4 Door application POD kit.
Aside from covering the trim panel hole (where
the manual handcrank of the manual window used
to be before conversation to power windows),
these 2 and 4 POD kit is capable of housing the
power window switches & power door lock switch
in its single bezel or cover. Though not as stylist
as the 80122-B, the 80124 is also paint-able to
match the anterior trim panel. Its individual
bezel that holds the switches comes in 1, 2, 3,
& 4 hole (bezels). For use only with 80SW3
and 80SW7 switches.
|
$26.68
|
|